Home/Residential Roofing/Metal Roofing
Metal Roofing in Atlanta, GA
Metal costs more up front and less over a lifetime. Whether that trade works for you depends almost entirely on how long you plan to own the building.
Standing Seam Versus Exposed Fastener
Nearly every metal roofing decision starts here, and the difference is not cosmetic.
| Standing seam | Exposed fastener | |
|---|---|---|
| Fasteners | Concealed under the seam | Driven through the panel face |
| Typical lifespan | 40–50 years | 25–30 years |
| Main failure point | Flashing and penetration details | Gasketed screws degrading in UV |
| Maintenance | Very low | Fastener replacement around year 12–18 |
| Cost | Higher | Meaningfully lower |
| Best for | Homes, visible roofs, long holds | Barns, warehouses, agricultural, budget-driven |
On a house you intend to keep, standing seam is generally the better long-run value. On a large industrial deck where the roof is invisible from the ground, exposed fastener often makes more economic sense — especially with a restoration coating scheduled down the line.
Why Metal Performs Well In Georgia
- Reflectivity. Painted metal with a reflective finish sheds solar heat that asphalt absorbs, which matters in an Atlanta August and matters again on your cooling bill
- Wind resistance. Properly installed standing seam handles wind uplift far better than any shingle
- Hail. Metal can dent but rarely breaches. Where a hailstorm ends a shingle roof's life, it usually leaves a metal roof functional
- Cool roof compliance. Many reflective metal finishes clear Atlanta's cool roof thresholds, which is increasingly relevant inside city limits
- No granules to lose. The failure mode that ends most asphalt roofs simply does not apply
The honest counterweight: metal costs two to three times more than architectural shingles, requires installers who genuinely know panel work, and is noisier in heavy rain without proper decking and underlayment beneath it.
Metal Roofing Services
New Metal Roof Installation
Standing seam and exposed-fastener systems for homes, commercial buildings and industrial facilities.
Metal Roof Repair
Fastener replacement, seam and panel repair, and flashing rebuilds at curbs, walls and penetrations.
Metal Roof Restoration
Re-fasten, treat seams and penetrations, then coat. A fraction of replacement cost when the panels are sound — see coatings and restoration.
Metal Roofing FAQs
How much does a metal roof cost in Atlanta?
Standing seam typically runs two to three times the cost of an architectural shingle roof on the same house; exposed-fastener systems land considerably closer to shingle pricing. Panel gauge, finish, roof complexity and the number of penetrations drive the spread.
Is a metal roof loud when it rains?
Far less than people expect. The barn-roof reputation comes from metal installed directly over open purlins with nothing underneath. Over solid decking and underlayment, a residential metal roof is comparable to shingles.
Will a metal roof make my house hotter?
The opposite. Reflective metal finishes shed solar radiation that asphalt absorbs, which usually lowers attic temperature and cooling load. Dark, non-reflective metal narrows the advantage.
Do metal roofs attract lightning?
No. Metal does not attract lightning, and because it is non-combustible and conductive, a metal roof is arguably safer in a strike than a combustible one.
Can you put metal over my existing shingles?
Sometimes, with the right framing and furring. We usually do not recommend it for the same reasons we do not recommend shingle layovers — you lose the chance to inspect the decking, and problems get sealed in under a fifty-year roof.
Keep Reading
Next Step
Thinking About Metal?
We will price both options on your actual roof — metal and architectural shingle — so you can compare real numbers instead of averages.